The H300 water filter is without a doubt Everpure’s most popular home water filtration system. This model is popular for a reason: it provides excellent water quality and is simple to install and use. If you’re looking for an under-sink water filter for your kitchen, the Everpure H300 should be at the top of your list if it isn’t already.
Powerful Filtration
Many homeowners’ first concern when selecting a water filtration system is the quality of drinking water that the system will provide. Many low-cost filtration options, such as pitcher filters, are not rated to remove specific contaminants or particle sizes because the filtration media is too loose to provide consistent filtration results. Everpure’s proprietary Micro-Pure filtration media is used in the Everpure H300 water filter cartridges to provide consistent high quality filtration.
These filters can remove contaminants that cause foul tastes and odors, reduces lead levels, and will remove harmful contaminants like biological cysts such as cryptosporidium that may have no effect on the taste of your water. These filters are intended to remove particles as small as 0.5 microns in size, which is the same filtration quality provided by the majority of Everpure home filter systems. This level of filtration is fine enough to significantly reduce and remove the presence of harmful contaminants while still retaining the vital minerals found naturally in your water.
Water Dispenser Options
You must install a dedicated drinking water dispenser to get water from an H300 filtration system. This will entail drilling a hole in your counter or sink to accommodate the installation of a small additional faucet. There is a wide variety of gooseneck faucets available, making it simple to find one that will complement your existing kitchen.
If you don’t want to add a new fixture to your kitchen, consider a full flow Everpure filtration system like the Everpure PBS400. These filters use the cold water side of your existing faucet to dispense drinking water. This means that you can easily install your new filter without changing the appearance of your kitchen.
Size
Size is another factor to consider when selecting a home filtration system. The dimensions of the H300 water filter are fairly standard, measuring 22″ x 5″ x 5″. The filter must be installed inside the cabinet beneath your sink, with a few inches of clearance to allow for the installation of replacement cartridges. There are only a few Everpure options smaller than the H300 if you have limited space.
Capacity
Finally, you should consider filter capacity. Every Everpure H-300 replacement filter cartridge can filter an average of 300 gallons of water, as the name implies. That amount is sufficient for many homeowners, though there are Everpure systems that can handle significantly more water. Regardless of system capacity, your filter cartridge should be changed at least once a year to ensure proper operation. It only takes a few moments to make this change, which consists of turning on the built-in water shut off valve on your filter head and replacing the metal canister filter like a lightbulb.
If you find that you need to replace your cartridge more than once a year, upgrading is simple. Many Everpure cartridges are designed to use the same filter head and share the dimensions of the H300 cartridge. This is one of the reasons why the H300 is such a good choice for homeowners. If you find yourself using more than one filter cartridge per year, you can easily upgrade this filter.
If you have any questions about the H300 water filtration system, you can contact the team at efilters.net. Their filtration experts are well-versed in Everpure systems.
